- faster drying process of the binder, makes the product resistant to unfavourable wether conditions much quicker
- allows the application of renders and exterior paintsin low temperatures between 0ºC and +10ºC and air humidity to 80%
- neutral- does not change the paint's and render's properties: colour and resistance properties.
DZ 10 Winter Additive
-
An additive fastening the drying and curing of FOVEO-TECH renders and paints in low temperatures (between 0ºC and +10ºC) and increased air humidity (to 80%). Thanks to the faster drying process of the binder, the product becomes resistant to unfavourable wether conditions much quicker. It is neutral, does not change the paint's and render's properties: colour and resistance properties.
Technical data
Volumetric density: approx. 0,88 g/cm3 Application temp.: between 0ºC and +10ºC -
SUBSTRATE PREPARATION:
Depends on the type of product to which the additive has been applied.
INSTRUCTIONS FOR USE:
Ready-to-use product. Dose it to the render or paint before the application. Apply when the temperature is between 0° C and + 10° C. Do not apply on frozen substrates. Protect the covered surface with foil or dense mesh till drying. The temperature during application and over the next 8 hours cannot be lower than 0ºC.
The areas where the product was used or elements covered with the product must be ventilated until the odour vanishes completely. Only then can they be used.
London
---
---°C
--%
DZ 10 Winter Additive
recommendations: 0°C to 10°C
humidity: <80%
Configurator
A wide range of colours of FOVEO-TECH products to be tested on 30 sample designs and own pictures. Get inspired
Proceed to configurator
An error occured while establishing the location